DC800 load bank
Product support page
Technical specification
Ratings
Voltage 50V DC
Maximum capacity 30kW
Current range 0.6 to 600 A
Control and Ventilation
Manual controls
10 x on/off push buttons (load sections and control)
7 x Load section toggle switch
1 x Rheostat variable section control
Control interface
Manual controls (described above)
5 x load section and control indicator lamps
Cooling Forced convection, horizontal orientation
Fans 2 x DC axial type
Control supply 48V DC
Source Internal (supply under test) or external supply (automatic, when connected)
Load controls 2 x load connection sockets (1 cable set included)
Measurement connections 1 x connection socket
Connection Interfaces
Suitable for Indoor use only
Ambient temperature -10°C to 50°C
Humidity 95% RH
Ingress protection IP20
Operating Environment
Construction
Resistor elements Expanded mesh and wound steel tape
Element material High grade stainless steel
Enclosure Aluminum, painted RAL9002 grey
Portability 2 x integrated handles, 2 x fixed position castors
Weight and Dimensions
Length 560mm
Width 400mm
Height 840mm
Weight 40kg
Electrical protection Over current and short circuit fuse protection
Thermal protection Over temperature thermostat cut out
Safety
Optional extras
Additional supply cables available in 5m lengths as standard or made to custom length if requested, with supply side connection method to suit the intended use.
Protective PVC cover available for protection during transport or storage.