AC6 load bank
Product support page
Technical specification
Voltage rating options
The AC6 is available in 2 standard versions with the following voltage ratings
Dual; 110V and 230V
Single; 230V only
Both versions are suitable for frequencies of 50Hz or 60Hz. Other voltages and frequencies are available on request.
Power Ratings
110V AC 1-phase
Maximum capacity 3.3kW
Load step resolution 0.30kW
230V AC 1-phase
Maximum capacity 6.0kW
Load step resolution 0.33kW
Control and Ventilation
Manual controls
6 x Load section toggle switches
Single; 1 x on/off MCB switch
Dual; 1 x 110/off/230 rotary selector switch
Control interface
Manual control (described above)
1 x Analogue volt meter
1 x Analogue frequency meter
1 x Analogue current meter
Cooling Forced convection, horizontal orientation
Fans 1 x AC axial type
Control supply 230V AC 1-phase 50/60Hz
Source Internal, taken from supply under test
Connection Interfaces
Load connections
Single; 1 x 1.5m integrated lead with 230V 32A IEC60309 inline socket (1P+N+PE)
Dual; as single plus 1 x 1.5m integrated lead with 110V 32A IEC 60309 inline socket (1P+N+PE)
Operating Environment
Suitable for Indoor use only
Ambient temperature -10°C to 50°C
Humidity 95% RH
Ingress protection IP20
Construction
Resistor elements Wound steel tape
Element material High grade stainless steel
Enclosure Aluminum, painted RAL9002 grey
Portability 1 x protective lid with integrated carry handle
Weight and Dimensions
Length 495mm
Width 220mm
Height 550mm
Weight 12kg
Safety
Electrical protection Short circuit protection via MCB(s)
Optional extras
Supply cables made to order to the desired length and with supply side connection method to suit the intended use.
PVC storage cover available for protection during transport or storage.